Communicate with Supplier? Supplier
sheldon Mr. sheldon
What can I do for you?
Contact Supplier

Ruizhun Precision Metal Co., Ltd.

Uav Mould Development - manufacturer, factory, supplier from China

(Total 24 Products for Uav Mould Development)

  • UAV accessories plastic molding

    UAV accessories plastic molding

    • Brand: RZ

    • Packaging: carton boxes with protective foams

    • Supply Ability: 5000sets/Week

    • Min. Order: 2 Piece/Pieces

    UAV accessories plastic molding the unmanned aerial vehicle UAV is the best development trend in the market It has a wide range of use and simple operation especially the young people very much Now the unmanned aerial vehicle in the market has developed to the field of daily entertainment agricultural production and...

    Contact Now

  • Magnesium Alloy UAV Floor

    Magnesium Alloy UAV Floor

    • Brand: RZ

    • Packaging: carton boxes with protective foams

    • Supply Ability: 1000000sets/Month

    • Min. Order: 1500+ Bag/Bags

    Magnesium Alloy UAV Floor Magnesium alloy unmanned aerial vehicle floor the most representative of the DJI Innovations UAV Magnesium Alloy Plate high precision and high corrosion resistance and high corrosion resistance high precision casting processing size high precision machined AZ91D magnesium alloy material die...

    Contact Now

  • Injection mould for automobile bumper

    Injection mould for automobile bumper

    • Brand: RZ

    • Packaging: wooden boxes with protective foams

    • Supply Ability: 5000sets/Week

    • Min. Order: 5000 Piece/Pieces

    The bumper is a safety device for absorption and mitigate the impact of the outside world before and after the door body it is necessary to consider the geometry of the bumper and the vehicle model to ensure the appearance but also conform to the mechanical properties and energy absorption characteristics to ensure...

    Contact Now

  • Semisolid Die Casting UAV Magnesium Alloy Base Plate

    Semisolid Die Casting UAV Magnesium Alloy Base Plate

    • Brand: RZ

    • Packaging: carton boxes with protective foams

    • Supply Ability: 1000000sets/Month

    • Min. Order: 1500+ Bag/Bags

    Magnesium alloy is the lightest metal in the industrial use of metal In the case of the same strength parts magnesium alloy parts can be thinner and lighter than plastic It can help the products to achieve the light quantified target in the market It also has a high precision of processing size and can be machined...

    Contact Now

  • Semi Solid Die Casting Manufacturing of UAV

    Semi Solid Die Casting Manufacturing of UAV

    • Brand: RZ

    • Packaging: carton boxes with protective foams

    • Supply Ability: 1000000sets/Month

    • Min. Order: 1500+ Bag/Bags

    Magnesium alloy is the lightest metal in industrial manufacture After semi solid processing the precision of metal wall thickness is processed to more than 0 3mm The special functions of magnesium alloy shock resistance anti wear and shielding electromagnetic wave can meet the requirements of light thin short and...

    Contact Now

  • Plastic Mould Making Product Injection Mould

    Plastic Mould Making Product Injection Mould

    • Brand: RZ

    • Packaging: wooden boxes with protective foams

    • Supply Ability: 5000sets/Week

    • Min. Order: 5000 Piece/Pieces

    In the injection mold assembly process EDM machine is widely used in all kinds of mold manufacturing The core of EDM machine is mainly embodied in the requirements of dimension precision profile precision and surface quality EDM machine to promote the further development of CNC machining technology and continuously...

    Contact Now

  • Precision Plastic Molding Auto Part Injection Mould

    Precision Plastic Molding Auto Part Injection Mould

    • Brand: RZ

    • Packaging: wooden boxes with protective foams

    • Supply Ability: 5000sets/Week

    • Min. Order: 5000 Piece/Pieces

    Injection moulding machine is widely used the modern manufacturing product component forming process almost all need to use a mold to complete Therefore the mold industry is an important part of the national High tech industry is an important and valuable technical resources Our company has about 100 people mold...

    Contact Now

  • Custom Injection Plastic Mould Plastic Injection Maker

    Custom Injection Plastic Mould Plastic Injection Maker

    • Brand: RZ

    • Packaging: wooden boxes with protective foams

    • Supply Ability: 5000sets/Week

    • Min. Order: 5000 Piece/Pieces

    Mould base is mold steel outside the forming part by a variety of steel plate with the composition of parts can be said to be the skeleton of the whole mold At present the application of plastic moulding manufacturing covers each product such as automobiles aerospace daily necessities electrical communication medical...

    Contact Now

  • Plastic Injection Molding Process Mould Maker

    Plastic Injection Molding Process Mould Maker

    • Brand: RZ

    • Packaging: wooden boxes with protective foams

    • Supply Ability: 5000sets/Week

    • Min. Order: 5000 Piece/Pieces

    The injection molding basics use the cold runner processing method The advantage of the cold runner is that it is easy to use and it can also meet certain aesthetic needs well The cold runner can reduce the injection of transparent acrylic ester or polycarbonate and so on to avoid the injection in some parts of the...

    Contact Now

  • Custom Plastic Injection Molding Manufacturing Mould Parts

    Custom Plastic Injection Molding Manufacturing Mould Parts

    • Brand: RZ

    • Packaging: wooden boxes with protective foams

    • Supply Ability: 5000sets/Week

    • Min. Order: 5000 Piece/Pieces

    Plastic Mold Making is the production of a variety of industrial products the important process equipment with the rapid development of the plastics industry as well as plastic products in the aerospace aerospace electronics machinery shipbuilding and automotive industries such as the promotion and application In...

    Contact Now

  • High Precision Plastic Mould for Customized Auto Parts

    High Precision Plastic Mould for Customized Auto Parts

    • Brand: RZ

    • Packaging: wooden boxes with protective foams

    • Supply Ability: 5000sets/Week

    • Min. Order: 5000 Piece/Pieces

    CNC Milling Machining is an indispensable and advanced processing method in auto body parts molding manufacturing CNC Milling Machine Production efficiency is high generally do not need to use special fixture and other special process equipment in the replacement of the workpiece only need to call stored in the NC...

    Contact Now

  • Double Color Plastic Mould for Customized High Precision

    Double Color Plastic Mould for Customized High Precision

    • Brand: RZ

    • Packaging: wooden boxes with protective foams

    • Supply Ability: 5000sets/Week

    • Min. Order: 5000 Piece/Pieces

    Double color mold process can make the appearance of the plastic mold components more beautiful easy to change color and can not spray the design and injection molding requirements high Because the mold to the sequential injection of different plastic the moving mode must be translated or rotated so the mold will do...

    Contact Now

  • Injection Mould Spare Part for Office Appliances

    Injection Mould Spare Part for Office Appliances

    • Brand: RZ

    • Packaging: wooden boxes with protective foams

    • Supply Ability: 5000sets/Week

    • Min. Order: 2 Piece/Pieces

    Rubber Mould Mold Plastic Injection often applied in Electronics Auto parts Industry accessories construction Industries Medical facility Aerospace Packaging filed and home application filed etc We have PP ABS PC PA6 PA66 PPT and other engineering plastics for customers to choose Our injection molds design from a few...

    Contact Now

  • Auto Parts Mould Manufacturing Injection Molding Machine

    Auto Parts Mould Manufacturing Injection Molding Machine

    • Brand: RZ

    • Packaging: wooden boxes with protective foams

    • Supply Ability: 5000sets/Week

    • Min. Order: 2 Piece/Pieces

    OEM Mould Manufacturing Products have digital moulds household moulds automotive and medical equipment moulds electric accessories moulds etc We specialize in manufacturing and supplying of prototypes and various moulds and dies such as plastic injection moulds die casting molds and progressive dies and so on Ruizhun...

    Contact Now

  • Double Color Plastic Part Mould for Handle

    Double Color Plastic Part Mould for Handle

    • Brand: RZ

    • Packaging: wooden boxes with protective foams

    • Supply Ability: 5000sets/Week

    • Min. Order: 2 Piece/Pieces

    Double color injection molding is a kind of two shot or multi shot molding This is done so that we can get two colored component with different properties In the Double Color Injection Mold method since a beautiful multi function molded product can be produced in one step it is possible to produce a molded item with...

    Contact Now

  • Custom Plastic Injection Moulding Service for ABS Parts

    Custom Plastic Injection Moulding Service for ABS Parts

    • Brand: RZ

    • Packaging: wooden boxes with protective foams

    • Supply Ability: 5000sets/Week

    • Min. Order: 2 Piece/Pieces

    Plastic Injection Tooling Moulding is injection molding by ABS material ABS is Strong Flexible Low Mold Shrinkage Tight Tolerance Chemical Resistance Applicable for Electroplating Naturally Opaque Low Medium Cost Widely used in automobile Consoles Panels Trim Vents Boxes Gauges Housings Toys etc Most automotive parts...

    Contact Now

  • Electronic Part Injection Plastic Moulding

    Electronic Part Injection Plastic Moulding

    • Brand: RZ

    • Packaging: wooden boxes with protective foams

    • Supply Ability: 5000sets/Week

    • Min. Order: 2 Piece/Pieces

    Parts Injection Mould Parts is used to create many things such as wire spools packaging bottle caps automotive dashboards Game boys pocket combs some musical instruments and parts of them one piece chairs and small tables storage containers mechanical parts including gears and most other injection moulding available...

    Contact Now

  • Custom Plastic Injection Moulding for Home Appliance

    Custom Plastic Injection Moulding for Home Appliance

    • Brand: RZ

    • Packaging: wooden boxes with protective foams

    • Supply Ability: 5000sets/Week

    • Min. Order: 2 Piece/Pieces

    Plastic Injection Mold Making is an injection molding by PA6 PA6 have features of High Strength Fatigue Resistance Chemical Resistance Low Creep Low Friction Almost Opaque White Medium High Cost Injection molding is the most common modern method of manufacturing parts it is ideal for producing high volumes of the same...

    Contact Now

  • Plastic Injection Mould for Electronic Parts

    Plastic Injection Mould for Electronic Parts

    • Brand: RZ

    • Packaging: wooden boxes with protective foams

    • Supply Ability: 5000sets/Week

    • Min. Order: 2 Piece/Pieces

    Speaker Mould Injection Product is injection molding by PET material PET material typical applications automotive industry structural components such as mirror boxes electrical components such as headlight reflectors etc electrical components motor housings electrical couplings relays switches microwave oven internal...

    Contact Now

  • Injection Moulding Tooling Maker Spare Parts

    Injection Moulding Tooling Maker Spare Parts

    • Brand: RZ

    • Packaging: wooden boxes with protective foams

    • Supply Ability: 5000sets/Week

    • Min. Order: 5000 Piece/Pieces

    Plastic injection moulding material directly affects the cooling effect commonly used mold materials are P20 steel H13 Steel P6 Steel S7 steel beryllium copper alloy aluminum 420 do not stainless steel 414 do not stainless steel Customers can be based on mechanical processing good surface processing and material...

    Contact Now

  • Professional Customized Plastic Mold Injection Mould

    Professional Customized Plastic Mold Injection Mould

    • Brand: RZ

    • Packaging: wooden boxes with protective foams

    • Supply Ability: 5000sets/Week

    • Min. Order: 5000 Piece/Pieces

    We offer precision tools service including mold design and fabricating molding casting CNC machining and rapid prototyping The auto part like car bumpers fenders hoods grilles doors backseats front covers are in larges size so the injection molds are needed to be made in large size as well This would require the...

    Contact Now

  • Customized Auto Body Plastic Moulding Equipment

    Customized Auto Body Plastic Moulding Equipment

    • Brand: RZ

    • Packaging: wooden boxes with protective foams

    • Supply Ability: 5000sets/Week

    • Min. Order: 5000 Piece/Pieces

    NC Wire Cutting Machining is an indispensable and advanced processing method in Injection Moulding Machine Process which uses wire electrodes as electrodes without making the special electric grade and can save electrode design and manufacture cost The direct use of electrical and thermal processing can facilitate the...

    Contact Now

  • Precision Plastic Molding Home Appliance Maker Kit Mould

    Precision Plastic Molding Home Appliance Maker Kit Mould

    • Brand: RZ

    • Packaging: wooden boxes with protective foams

    • Supply Ability: 5000sets/Week

    • Min. Order: 5000 Piece/Pieces

    The mold cavity and core insert refer to the precision parts for the key operation of the center part of the injection molding press Commonly used materials are s136 p20 718 738 2738 other materials according to the actual requirements of guests to choose In order to ensure the high precision mold and high speed the...

    Contact Now

  • Professional Custom Mold Design Injection Moulds Maker

    Professional Custom Mold Design Injection Moulds Maker

    • Brand: RZ

    • Packaging: wooden boxes with protective foams

    • Supply Ability: 5000sets/Week

    • Min. Order: 5000 Piece/Pieces

    The cold runner and hot runner are two ways of using plastic injection mold to process plastic products Before making the mold we should consider the problems of plastic material performance and product quality of plastic products so that the choice is to use a cold runner or hot runner or a mixture of the two The hot...

    Contact Now

Review

K A J Symes

Oct 19, 2019 5

This is a very good Uav Mould Development . This is probably the 6th or 7th product that I have bought. Much batter than another one that I bought from another brand.
Alberto Restrepo

Oct 12, 2019 5

Good Uav Mould Development . Thank you for your prompt response to the appropriate shipping process and questions.
Derek Hanneson

Oct 06, 2019 5

This is the best Uav Mould Development I've ever received anything ordered on the web. Thank you, Ruizhun Precision Metal Co., Ltd. . I would buy again.
  • Video
  • Magnesium Alloy UAV Floor
  • Related Information
We now have quite a few superb workers customers very good at marketing and advertising, QC, and working with forms of troublesome dilemma while in the creation approach for Uav Mould Development , UAV Mould Development , Small Mold Development , but also because of our good after-sale service . We are here waiting for you for your inquiry.
"With all the ""Client-Oriented"" business enterprise philosophy, a rigorous quality regulate procedure, sophisticated production gear as well as a sturdy R&D team, we constantly give superior quality products and solutions, outstanding providers and competitive prices for Uav Mould Development , UAV Mould Development , Small Mold Development , Further we've been supported by highly experienced and knowledgeable professionals who have immense expertise in their respective domain. These professionals work in close coordination with each other to provide our clients an effective range of goods.

Send Us a Message

We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.

Send Inquiry

sheldon

Mr. sheldon

Email:

Send Inquiry

Tel:86-0769-81025999

Fax:

Mobile Phone:+8613680709426Contact me with Whatsapp

Email:

Address:A: No. 198 Xinyi Road, Jing Lian Industrial Zone, Qiaotou Town, Dongguan, Guangdong

Mobile Site

http://www.rzjmdiecasting.com