Communicate with Supplier? Supplier
sheldon Mr. sheldon
What can I do for you?
Contact Supplier

Ruizhun Precision Metal Co., Ltd.

Hot Runner Mold - manufacturer, factory, supplier from China

(Total 24 Products for Hot Runner Mold)

  • Large Hot Runner Mold

    Large Hot Runner Mold

    • Brand: RZ

    • Packaging: wooden boxes with protective foams

    • Supply Ability: 5000sets/Week

    • Min. Order: 2 Piece/Pieces

    Large hot runner mold manufacturing is a mold using heating equipment to make the inner material of the flow channel unfrozen The quality of the parts of the hot runner is good the residual stress is low and the parts have small deformation and the high quality products can be produced After forming the hot runner...

    Contact Now

  • Hot runner mold design and production

    Hot runner mold design and production

    • Brand: RZ

    • Packaging: wooden boxes with protective foams

    • Supply Ability: 5000sets/Week

    • Min. Order: 1 Piece/Pieces

    Hot runner mold design and production The hot runner system is a combination of heating parts used in plastic injection moulds which injecting molten plastic into the cavity of the mold The cavity is part of the mold which is similar to the part to be produced The advantages of the hot runner system are shorten the...

    Contact Now

  • Electronic Product Accessories Mold Manufacturing

    Electronic Product Accessories Mold Manufacturing

    • Brand: RZ

    • Packaging: wooden boxes with protective foams

    • Supply Ability: 5000sets/Week

    • Min. Order: 2 Piece/Pieces

    Mold manufacturing of electronic products electronic products such as printers set top boxes routers and other parts of the mold the same is also divided into die casting die injection mold also can be divided into hot runner mold common mold According to customer requirements we can produce molds that meet customer...

    Contact Now

  • Large hot runner mould manufacturing

    Large hot runner mould manufacturing

    • Brand: RZ

    • Packaging: wooden boxes with protective foams

    • Supply Ability: 5000sets/Week

    • Min. Order: 2 Piece/Pieces

    Hot Runner Mould use heating device to make the melt in the runner mould of hot flow path is always not solidified mold shorter than traditional die forming cycle more save raw materials stamping shape cycle shortened in pure for not cold runner in the mould of hot flow path do not produce cost reduce waste improve...

    Contact Now

  • Small-scale Hot Runner Mould Manufacturing

    Small-scale Hot Runner Mould Manufacturing

    • Brand: RZ

    • Packaging: wooden boxes with protective foams

    • Supply Ability: 5000sets/Week

    • Min. Order: 2 Piece/Pieces

    Hot runner mold is a mold that is not solidified raw material that has been melted in the flow path of the common mold which is shorter than the traditional mold and saves the raw material In the pure hot runner mold the quality of the product can be improved because there is no cold runner in the mold Goods Customers...

    Contact Now

  • Small Product Mold Manufacturing

    Small Product Mold Manufacturing

    • Brand: RZ

    • Packaging: wooden boxes with protective foams

    • Supply Ability: 5000sets/Week

    • Min. Order: 2 Piece/Pieces

    Small product mold manufacturing small products such as the production of glasses frame key ornaments and other small parts of the mold whether the size of the mold manufacturing process is the same and the inspection conditions inspection procedures are the same The development of small product mold can develop...

    Contact Now

  • Auto parts large-scale mould manufacturing

    Auto parts large-scale mould manufacturing

    • Brand: RZ

    • Packaging: wooden boxes with protective foams

    • Supply Ability: 5000sets/Week

    • Min. Order: 2 Piece/Pieces

    Large mould manufacturing of automobile parts suitable for manufacturing large auto parts such as shell wheel hub car seat etc Mold type can have a common mold hot runner mold and so on according to customer needs our company design department to design mould 3 d sketch again by mould department according to the 3 d...

    Contact Now

  • Auto High Precision Mould Manufacturing

    Auto High Precision Mould Manufacturing

    • Brand: RZ

    • Packaging: wooden boxes with protective foams

    • Supply Ability: 5000sets/Week

    • Min. Order: 2 Piece/Pieces

    Auto High Precision Mould Manufacturing suitable for the production of large or small parts of the car large parts such as shell hub car seat and other small parts including rearview mirror bracket handle button and so on The type of automobile die is divided into an ordinary mold and hot runner mold According to the...

    Contact Now

  • Auto parts mold manufacturing

    Auto parts mold manufacturing

    • Brand: RZ

    • Packaging: wooden boxes with protective foams

    • Supply Ability: 5000sets/Week

    • Min. Order: 2 Piece/Pieces

    The mold manufacturing of auto parts and parts the auto parts mold the development of the mold for large auto parts are more complex and more demanding for the process It is not only the mold manufacturing equipment but also the design of the R amp D personnel The large mold manufacturing of auto parts is suitable for...

    Contact Now

  • Injection of automobile products

    Injection of automobile products

    • Brand: RZ

    • Packaging: carton boxes with protective foams

    • Supply Ability: 5000sets/Week

    • Min. Order: 5000 Piece/Pieces

    The injection of automobile products is used for the production of high quality automobile parts such as cylinder block cylinder head and gearbox shell The requirements of automobile manufacturing are getting higher and higher now It is not only car performance car driving experience but also very important appearance...

    Contact Now

  • Mould manufacturing of auto parts

    Mould manufacturing of auto parts

    • Brand: RZ

    • Packaging: carton boxes with protective foams

    • Supply Ability: 5000sets/Week

    • Min. Order: 5000 Piece/Pieces

    The mold manufacturing of auto parts the Mould production of large auto parts and the development of the mold for Large mold production are a high requirement It is necessary to design scientific design of R amp D personnel and advanced mold manufacturing equipment Automobile parts large mold manufacturing suitable...

    Contact Now

  • Small parts die for automobile

    Small parts die for automobile

    • Brand: RZ

    • Packaging: carton boxes with protective foams

    • Supply Ability: 5000sets/Week

    • Min. Order: 5000 Piece/Pieces

    Small parts die for automobile Small Auto Parts Mold The production of small car mold auto parts mold and automobile parts die development is a need of high technological requirements not only the need for advanced mold manufacturing equipment design and research and development personnel scientific design Small car...

    Contact Now

  • Mold manufacturing for precision products

    Mold manufacturing for precision products

    • Brand: RZ

    • Packaging: wooden boxes with protective foams

    • Supply Ability: 5000sets/Week

    • Min. Order: 5000 Piece/Pieces

    Precision product mold manufacturing Precision product mold manufacturing the production of precision parts such as car brake mechanical accessories IT industry accessories precision needs a higher product Production of precision products According to customer needs mold type can be a hot runner mold cold runner mold...

    Contact Now

  • Mould for small parts of automobile

    Mould for small parts of automobile

    • Brand: RZ

    • Packaging: wooden boxes with protective foams

    • Supply Ability: 5000sets/Week

    • Min. Order: 5000 Piece/Pieces

    Mould for small parts of automobile Small mold manufacturing small spare parts mold manufacturing Mould manufacturing for small products is generally evaluated through the early mold manufacturing the design department designed the mold 3D diagram after the mold manufacturing and then the test samples finally after...

    Contact Now

  • Auto Parts Seat Mold Manufacturing

    Auto Parts Seat Mold Manufacturing

    • Brand: RZ

    • Packaging: wooden boxes with protective foams

    • Supply Ability: 5000sets/Week

    • Min. Order: 5000 Piece/Pieces

    Auto parts seat mold manufacturing Automobile die design high efficiency car mold car mold can be divided into car body mold auto parts mold After making the automobile dies die design and successfully designing the molds the trial department carries out the test samples until the production department produces the...

    Contact Now

  • Car Seat Mold Manufacturing

    Car Seat Mold Manufacturing

    • Brand: RZ

    • Packaging: wooden boxes with protective foams

    • Supply Ability: 5000sets/Week

    • Min. Order: 5000 Piece/Pieces

    Car seat mold manufacturing high quality car seat mold car seat production the first thing to do is the car seat mold design design the mold after the test samples until the finished product auto parts mold auto parts development is a need for injection mold manufacturing and other high technical requirements not only...

    Contact Now

  • Automotive Parts Plastic Mold Manufacturing

    Automotive Parts Plastic Mold Manufacturing

    • Brand: RZ

    • Packaging: wooden boxes with protective foams

    • Supply Ability: 5000sets/Week

    • Min. Order: 5000 Piece/Pieces

    Automotive parts plastic mold manufacturing automotive parts plastic molding molds automotive parts modeling tools have a lot of the most important tool is the mold the high quality of the car mold car mold design can be divided into car body mold auto parts mold The normal process of mold design is after the mold is...

    Contact Now

  • Manufacturing of Automobile Seat Mould

    Manufacturing of Automobile Seat Mould

    • Brand: RZ

    • Packaging: wooden boxes with protective foams

    • Supply Ability: 5000sets/Week

    • Min. Order: 5000 Piece/Pieces

    Car seat mold manufacturing or car seat support mold all belong to the automobile mold manufacturing the main factor in the mold design is the automobile industry s particularity The products produced from the mold must be able to ensure the driver s personal safety The molds made can be produced by using...

    Contact Now

  • Plastic Injection Mold Making Plastic Insert Mold

    Plastic Injection Mold Making Plastic Insert Mold

    • Brand: RZ

    • Packaging: wooden boxes with protective foams

    • Supply Ability: 5000sets/Week

    • Min. Order: 5000 Piece/Pieces

    Injection molding process steps are the process of making a certain shape of semi finished products by means of pressure injection cooling and detachment of the molten material In the process of hot runner mold forming the melt temperature of the molten plastic is controlled accurately in the flow channel system The...

    Contact Now

  • Automobile mold large mold

    Automobile mold large mold

    • Brand: RZ

    • Packaging: wooden boxes with protective foams

    • Supply Ability: 5000sets/Week

    • Min. Order: 5000 Piece/Pieces

    Large auto mold design and manufacturing refers to large parts mold large automobile dies automobile mold large mold such as automobile intake grille mold car bumper mold car tail plate mold and so on The new era cars tend to be better aerodynamic design together with higher performance cars which will improve the...

    Contact Now

  • Large Automobile Mould Design & Manufactur

    Large Automobile Mould Design & Manufactur

    • Brand: RZ

    • Packaging: wooden boxes with protective foams

    • Supply Ability: 5000sets/Week

    • Min. Order: 5000 Piece/Pieces

    Large automobile mold design manufacture refers to large automobile mold automobile mold large mold such as automobile intake grille mold car body mold car tail plate mold car bumper mold and so on At present the new era of the market tends to design a better aerodynamics body and pursue higher performance cars This...

    Contact Now

  • Double color injection mold manufacturing

    Double color injection mold manufacturing

    • Brand: RZ

    • Packaging: wooden boxes with protective foams

    • Supply Ability: 5000sets/Week

    • Min. Order: 5000 Piece/Pieces

    Double color injection mold manufacturing double color product production double color product injection molding the production of double color products or polychromatic products such as electrical grip button product shell plastic gift box household electrical appliances and other accessories As a manufacturer of...

    Contact Now

  • Automobile parts mould manufacturing

    Automobile parts mould manufacturing

    • Brand: RZ

    • Packaging: wooden boxes with protective foams

    • Supply Ability: 5000sets/Week

    • Min. Order: 5000 Piece/Pieces

    Automobile parts mold manufacturing Production of various automobile molds The Mould for assembly parts of an automobile Assembly parts of automobile mold are divided into large automobile molds and other small car molds The large automobile dies such as the car body mold the car tail plate mold the automobile intake...

    Contact Now

  • Large Hot Runner Mold Making

    Large Hot Runner Mold Making

    • Brand: RZ

    • Packaging: wooden boxes with protective foams

    • Supply Ability: 5000sets/Week

    • Min. Order: 5000 Piece/Pieces

    Large hot runner mold making Large hot runner mold is a mold which is not solidified raw material melted in the flow passage to the ordinary mold installation heating device In the pure hot runner mold because there is no cold runner it can improve the quality of the product It is shorter than the traditional mold...

    Contact Now

Review

Mrs.sarah Lobwein

Oct 27, 2019 4

extremely quick shipping. good quality product.High recommend Ruizhun Precision Metal Co., Ltd. company!
Sommas Payackso

Oct 22, 2019 5

Everything goes well,will come and buy again if the Hot Runner Mold is really good.
Nitish, Sewraz

Oct 03, 2019 5

Nice transaction. The Hot Runner Mold Fit the description.
  • Related Information
The corporate keeps towards the operation concept "scientific administration, superior quality and performance primacy, client supreme for Hot Runner Mold , Hot Runner Mould , OEM Hot Runner Mould , Warmly welcome to cooperate and develop with us! we are going to continue to provide product or service with high quality and competitive rate.
"Adhering to your principle of ""quality, assistance, performance and growth"", we've obtained trusts and praises from domestic and worldwide client for Hot Runner Mold , Hot Runner Mould , OEM Hot Runner Mould , As the world economic integration bringing challenges and opportunities to the xxx industry our company by carrying on our teamwork quality first innovation and mutual benefit are confident enough to offer our clients sincerely with qualified products competitive price and great service and to build a brighter future under the spirit of higher faster stronger with our friends together by carrying on our discipline.

Send Us a Message

We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.

Send Inquiry

sheldon

Mr. sheldon

Email:

Send Inquiry

Tel:86-0769-81025999

Fax:

Mobile Phone:+8613680709426Contact me with Whatsapp

Email:

Address:A: No. 198 Xinyi Road, Jing Lian Industrial Zone, Qiaotou Town, Dongguan, Guangdong

Mobile Site

http://www.rzjmdiecasting.com