Communicate with Supplier? Supplier
sheldon Mr. sheldon
What can I do for you?
Contact Supplier

Ruizhun Precision Metal Co., Ltd.

Automobile Intake Grille - manufacturer, factory, supplier from China

(Total 24 Products for Automobile Intake Grille)

  • Large Auto Parts Mould Manufacturing

    Large Auto Parts Mould Manufacturing

    • Brand: RZ

    • Packaging: wooden boxes with protective foams

    • Supply Ability: 5000sets/Week

    • Min. Order: 2 Piece/Pieces

    Large auto parts mold manufacturing The most important component of automobile mold is the covering mold such as automobile shell wheel hub bumper and other parts The manufacture of large molds also needs to be refined and the products produced can ensure the precise size and compactness of the later assembly For...

    Contact Now

  • Large Auto Parts Injection Molding

    Large Auto Parts Injection Molding

    • Brand: RZ

    • Packaging: wooden boxes with protective foams

    • Supply Ability: 5000sets/Week

    • Min. Order: 2 Piece/Pieces

    Large auto parts injection molding Large auto parts production such as automotive air intake grille headlights tail plate etc usually with PPA PA polyamide Polyphthalamide series materials for production the new era of cars tend to be better aerodynamic body design together with the higher performance of the motor it...

    Contact Now

  • large auto parts plastic injection molding

    large auto parts plastic injection molding

    • Brand: RZ

    • Packaging: carton boxes with protective foams

    • Supply Ability: 5000sets/Week

    • Min. Order: 2 Piece/Pieces

    large auto parts plastic injection molding Production of large auto parts such as automobile intake grille car tail plate lamp bracket etc most of the materials used in the production of such products are PA and glass fiber reinforced PA66 this material has good dimension stability good creep resistance wide...

    Contact Now

  • Automobile mold large mold

    Automobile mold large mold

    • Brand: RZ

    • Packaging: wooden boxes with protective foams

    • Supply Ability: 5000sets/Week

    • Min. Order: 5000 Piece/Pieces

    Large auto mold design and manufacturing refers to large parts mold large automobile dies automobile mold large mold such as automobile intake grille mold car bumper mold car tail plate mold and so on The new era cars tend to be better aerodynamic design together with higher performance cars which will improve the...

    Contact Now

  • Large Automobile Mould Design & Manufactur

    Large Automobile Mould Design & Manufactur

    • Brand: RZ

    • Packaging: wooden boxes with protective foams

    • Supply Ability: 5000sets/Week

    • Min. Order: 5000 Piece/Pieces

    Large automobile mold design manufacture refers to large automobile mold automobile mold large mold such as automobile intake grille mold car body mold car tail plate mold car bumper mold and so on At present the new era of the market tends to design a better aerodynamics body and pursue higher performance cars This...

    Contact Now

  • Automobile parts mould manufacturing

    Automobile parts mould manufacturing

    • Brand: RZ

    • Packaging: wooden boxes with protective foams

    • Supply Ability: 5000sets/Week

    • Min. Order: 5000 Piece/Pieces

    Automobile parts mold manufacturing Production of various automobile molds The Mould for assembly parts of an automobile Assembly parts of automobile mold are divided into large automobile molds and other small car molds The large automobile dies such as the car body mold the car tail plate mold the automobile intake...

    Contact Now

  • Automobile Intake Grille Mold Manufacturing

    Automobile Intake Grille Mold Manufacturing

    • Brand: RZ

    • Packaging: wooden boxes with protective foams

    • Supply Ability: 5000sets/Week

    • Min. Order: 5000 Piece/Pieces

    The main functions of the automobile intake grille are heat dissipation and air intake not only that but also in accordance with the scientific requirements of aerodynamics so the manufacturing of the intake grille dies not only needs advanced equipment but also needs scientific design and precision production...

    Contact Now

  • Large Hot Runner Mold Making

    Large Hot Runner Mold Making

    • Brand: RZ

    • Packaging: wooden boxes with protective foams

    • Supply Ability: 5000sets/Week

    • Min. Order: 5000 Piece/Pieces

    Large hot runner mold making Large hot runner mold is a mold which is not solidified raw material melted in the flow passage to the ordinary mold installation heating device In the pure hot runner mold because there is no cold runner it can improve the quality of the product It is shorter than the traditional mold...

    Contact Now

  • Mould Design and Manufacturing of Auto Parts

    Mould Design and Manufacturing of Auto Parts

    • Brand: RZ

    • Packaging: wooden boxes with protective foams

    • Supply Ability: 5000sets/Week

    • Min. Order: 5000 Piece/Pieces

    Automobile injection mold is a kind of automobile mold It is the first step to produce auto parts The mold is divided into die casting mold and injection mold The die casting dies such as car body steel frame mold automobile shell mold injection mold such as automobile intake grille mold automobile bumper mold etc At...

    Contact Now

  • Injection Molding of Automobile Decorative Strip

    Injection Molding of Automobile Decorative Strip

    • Brand: RZ

    • Packaging: wooden boxes with protective foams

    • Supply Ability: 5000sets/Week

    • Min. Order: 5000 Piece/Pieces

    Deciding the value of a car is in terms of vehicle lines vehicle logo headlights intake grille and so on The function of the intake grille is to protect the water tank and protect the components from the engine room to avoid the impact of the external objects The modeling of the car will also take into account the...

    Contact Now

  • Injection mould for automobile bumper

    Injection mould for automobile bumper

    • Brand: RZ

    • Packaging: wooden boxes with protective foams

    • Supply Ability: 5000sets/Week

    • Min. Order: 5000 Piece/Pieces

    The bumper is a safety device for absorption and mitigate the impact of the outside world before and after the door body it is necessary to consider the geometry of the bumper and the vehicle model to ensure the appearance but also conform to the mechanical properties and energy absorption characteristics to ensure...

    Contact Now

  • Injection Molding Auto Parts Automobile Plastic Parts

    Injection Molding Auto Parts Automobile Plastic Parts

    • Brand: RZ

    • Packaging: wooden boxes with protective foams

    • Supply Ability: 5000sets/Week

    • Min. Order: 2 Piece/Pieces

    Injection molding is considered to be the most versatile of all available molding processes because it can be used to make various sizes and shapes of parts Due to its excellent versatility injection molding can be used to manufacture complex small parts that are used in large automotive parts and surgical injection...

    Contact Now

  • Plastic Injection Molding Custom Auto Parts Automobile Tool

    Plastic Injection Molding Custom Auto Parts Automobile Tool

    • Brand: RZ

    • Packaging: wooden boxes with protective foams

    • Supply Ability: 5000sets/Week

    • Min. Order: 2 Piece/Pieces

    Polypropylene PP is one of the most widely produced Plastic Injection Tooling products in the world It s known for its chemical resistance elasticity and toughness fatigue resistance insulation properties and transmissivity Although flammable and vulnerable to UV radiation polypropylene still offers good resistance to...

    Contact Now

  • Injection of automobile products

    Injection of automobile products

    • Brand: RZ

    • Packaging: carton boxes with protective foams

    • Supply Ability: 5000sets/Week

    • Min. Order: 5000 Piece/Pieces

    The injection of automobile products is used for the production of high quality automobile parts such as cylinder block cylinder head and gearbox shell The requirements of automobile manufacturing are getting higher and higher now It is not only car performance car driving experience but also very important appearance...

    Contact Now

  • Automobile Airbag Shell Manufacturing

    Automobile Airbag Shell Manufacturing

    • Brand: RZ

    • Packaging: wooden boxes with protective foams

    • Supply Ability: 5000sets/Week

    • Min. Order: 5000 Piece/Pieces

    Safety airbag is a kind of passive safety protection system It is used in combination with the seat belt It can provide effective anti collision protection for passengers Airbag shell mold manufacture With the Design and manufacture of the airbag in various countries the equipment rate of the airbag is getting higher...

    Contact Now

  • Injection mould for automobile

    Injection mould for automobile

    • Brand: RZ

    • Packaging: wooden boxes with protective foams

    • Supply Ability: 5000sets/Week

    • Min. Order: 5000 Piece/Pieces

    The injection mold for the automobile is also called the injection mold Injection mold manufacturing is divided into automotive injection mold aerospace equipment injection mold and so on The molding technology of this mold is to place plastic raw materials in the heating container of the injection machine The plastic...

    Contact Now

  • Automobile seat base mold

    Automobile seat base mold

    • Brand: RZ

    • Packaging: wooden boxes with protective foams

    • Supply Ability: 5000sets/Week

    • Min. Order: 5000 Piece/Pieces

    Automobile seat base mold auto parts mold manufacturing is the biggest hardware support of the automobile industry not only need advanced instruments and equipment but also need the technical support of the R amp D team The Car seat support mold making is a base for the production of the car seat It is not only the...

    Contact Now

  • Automobile lighting bracket mould manufacturing

    Automobile lighting bracket mould manufacturing

    • Brand: RZ

    • Packaging: wooden boxes with protective foams

    • Supply Ability: 5000sets/Week

    • Min. Order: 5000 Piece/Pieces

    Automobile lighting bracket mold manufacturing Manufacturing of Automobile lamp group Car Lamp group shell appearance types are divided into circular light oval light long circular lighting car LED lighting and so on automobile accessories manufacturing in view of the automotive industry s particularity the trend of...

    Contact Now

  • Various support molds of automobile

    Various support molds of automobile

    • Brand: RZ

    • Packaging: wooden boxes with protective foams

    • Supply Ability: 5000sets/Week

    • Min. Order: 5000 Piece/Pieces

    Various support molds of an automobile of Small Mould Manufacturing of Automobile and the types are divided into various support molds driving molds in the driving chamber the mold of the bottom parts of the car and so on Automobile mold making in view of the particularity of the automobile industry the new era of the...

    Contact Now

  • Manufacturing of Automobile Seat Mould

    Manufacturing of Automobile Seat Mould

    • Brand: RZ

    • Packaging: wooden boxes with protective foams

    • Supply Ability: 5000sets/Week

    • Min. Order: 5000 Piece/Pieces

    Car seat mold manufacturing or car seat support mold all belong to the automobile mold manufacturing the main factor in the mold design is the automobile industry s particularity The products produced from the mold must be able to ensure the driver s personal safety The molds made can be produced by using...

    Contact Now

  • Small parts die for automobile

    Small parts die for automobile

    • Brand: RZ

    • Packaging: carton boxes with protective foams

    • Supply Ability: 5000sets/Week

    • Min. Order: 5000 Piece/Pieces

    Small parts die for automobile Small Auto Parts Mold The production of small car mold auto parts mold and automobile parts die development is a need of high technological requirements not only the need for advanced mold manufacturing equipment design and research and development personnel scientific design Small car...

    Contact Now

  • Automobile Panel Die Design

    Automobile Panel Die Design

    • Brand: RZ

    • Packaging: wooden boxes with protective foams

    • Supply Ability: 5000sets/Week

    • Min. Order: 5000 Piece/Pieces

    Automobile body mold especially large and medium cover mold is an important part of automobile body manufacturing technology and is also a key link to form auto development ability Automobile mold products include automobile cover mold tire mold interior and exterior plastic parts mold car lamp mold automobile safety...

    Contact Now

  • Mould for Automobile Plastic Parts

    Mould for Automobile Plastic Parts

    • Brand: RZ

    • Packaging: wooden boxes with protective foams

    • Supply Ability: 5000sets/Week

    • Min. Order: 5000 Piece/Pieces

    Automobile dies which are used in the automobile field are known as the mother of the automobile industry More than 90 of parts of automobile production need to rely on mold forming Automobile body mold especially large and medium cover mold is an important part of automobile body manufacturing technology and is also...

    Contact Now

  • Automobile Inlet Grille Mold Making

    Automobile Inlet Grille Mold Making

    • Brand: RZ

    • Packaging: wooden boxes with protective foams

    • Supply Ability: 5000sets/Week

    • Min. Order: 5000 Piece/Pieces

    Machining accuracy is high A mold is usually made up of the concave die punch and mould frame some of which may be multiple assembly modules As a result the combination of the upper and lower die the combination of the insert and the cavity and the assembly of the modules all require very high machining accuracy Our...

    Contact Now

Review

Sp Verma

Oct 16, 2019 5

Timely delivery, strict implementation of the contract provisions of the goods, encountered special circumstances, but also actively cooperate, a trustworthy company!By the way, the Automobile Intake Grille is really in high quality!
Leyla Emir

Oct 16, 2019 5

Ruizhun Precision Metal Co., Ltd. company can keep improving and perfecting products and service, it is in line with the rules of market competition, a competitive company.
Valentina Salinas

Oct 08, 2019 4

In our cooperated wholesalers, Ruizhun Precision Metal Co., Ltd. company has the best quality and reasonable price, they are our first choice.
  • Related Information
We've been committed to giving easy,time-saving and money-saving one-stop purchasing support of consumer for Automobile Intake Grille , Automobile Intake Grille Production , Automobile Inlet Grille Mold , We're seeking forward to forming successful business enterprise romantic relationship with new shoppers in the around upcoming!
Reliable quality and good credit standing are our principles, which will help us at a top-ranking position. Adhering to the tenet of "quality first, customer supreme" for Automobile Intake Grille , Automobile Intake Grille Production , Automobile Inlet Grille Mold , Our clients mainly distributed in the North America Africa and Eastern Europe. we can supply high quality products with the very competitive price.

Send Us a Message

We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.

Send Inquiry

sheldon

Mr. sheldon

Email:

Send Inquiry

Tel:86-0769-81025999

Fax:

Mobile Phone:+8613680709426Contact me with Whatsapp

Email:

Address:A: No. 198 Xinyi Road, Jing Lian Industrial Zone, Qiaotou Town, Dongguan, Guangdong

Mobile Site

http://www.rzjmdiecasting.com